Ref :UM-CT7-11-001 Issue : 01 Date : 28/04/2011 Page 12 of 35 5 CT7 Operation 5.1 CT7 description The following drawing shows the main features of CT7 : Cover Command 5 place joystick UP ASTRO COATING MONITOR Dust scattering LEFT RIGHT ENTER Specular reflectivity 7 bands from 365 nm to 970 nm DOWN Tycho M3 09-17-2011 REFLECTIVITY DUST 365 nm: 76.4% 7.5 405 nm: 84.7% 5.0 464 nm: 91.9% 3.2 522 nm: 93.7% 2.8 624 nm: 94.2% 2.0 760 nm: 79.4% 1.3 970 nm: 92.8% 0.7 www.opo.be Display screen Measurement aperture Positionning pads Protection pads CT‐7 Instrument. Reset Serial USB On the top cover you find an access for the mini USB‐B > connector for connection CT7 to a PC (power and data connection).
On the back side, there is a 1 mm hole that gives a protected access to a RESET switch. Also on the back side you may find the Serial Number of the instrument. The same number is returned by soft to CT7 Console. This document is OPO property. It may not be either used or copied without authorization. OPO sprl, Crawhez 9, 4890 Thimister Clermont, Belgium. +32 87688989 - +32 87598990