Chapter3 Handling Select the form of the paper. • Die-cut label • Full-page label • Continuous paper • Wristband paper Select a media saving setting. The [Media Saving] function eliminates margins from one-page print data to suppress wasting paper. c IMPORTANT If the print data includes barcode font replacement data, the [Media Saving] setting such as [Eliminate Lower Margin] and [Eliminate Lower and Upper Margin] is ignored. Top margin Print data Paper feed direction Bottom margin • No Saving: Paper is advanced before and after printing causing top and bottom margins on the printout. • Eliminate Lower Margin: Paper is not advanced after printing to eliminate bottom margin from the printout.
• Eliminate Lower and Upper Margin: Paper is not advanced before and after printing to eliminate both top and bottom margins from the printout. If you set the printer to cut paper in the [Settings for Paper Handling After Print] setting, the length of at least 8 mm (0.31 inches) is required. When the length of print data is less than 8 mm (0.31 inches), the margins are not eliminated even if you have set to [Eliminate Lower Margin] or [Eliminate Lower And Upper Margin]. Print data length Minimum length: 8 mm (0.31 inches) Margin If you want to print at a length that matches the print data, set the length to the maximum and use the [Media Saving] function. Select the paper type.
( "Paper Specifications" on page 359 ) 89 5 Media Form 6 Media Saving (for continuous paper/full-page label only) 7 Media Coating Type