Chapter3 Handling Select the print quality. Print resolution when [Media Type] is [Plain Paper] • Max Speed: 300 x 600 dpi *1 • Speed: 600 x 600 dpi (initial setting) • Normal: 600 x 600 dpi • Quality: 600 x 1200 dpi *2 Print resolution when [Media Type] is [Texture Paper], [Matte Paper] or [Synthetic] • Max Speed: 300 x 600 dpi *1 • Speed: 600 x 600 dpi • Normal: 600 x 600 dpi (initial setting) • Quality: 600 x 1200 dpi *2 Print resolution when [Media Type] is [Glossy Paper], [Glossy Film], or [High Glossy Paper] • Normal: 600 x 600 dpi • Quality: 600 x 1200 dpi (Initial setting) *2 • Max Quality: 1200 x 1200 dpi Print resolution when [Media Type] is [Wristband Paper] • Max Speed:
300 x 600 dpi *1 • Speed: 600 x 600 dpi (initial setting) • Normal: 600 x 600 dpi *1: The resolution of the print data sent to the printer should be 300 dpi. *2: The resolution of the print data sent to the printer should be 600 dpi. c IMPORTANT Supported paper types vary depending on which type of black ink, gloss black or matte black, is installed. See "Paper Specifications" on page 359 . If you change the [Media Type] setting, the [Print Quality] setting will automatically be set to the initial setting suitable for the selected paper type. Click [Advanced] to configure more detailed print quality settings. Configure color correction settings.
For more details about the color correction, see "Color Correction" on page 277 . • Epson Vivid Color: The color correction engine in the printer corrects the color to a vivid shade suitable for labels. The print results have color tones that are different from those of typical LCD monitors. • Epson Preferred Color: The color correction engine in the printer corrects the color to a vivid shade suitable for labels. The color tones are different from those of typical LCD monitors. • ICM: The color correction engine in the OS corrects the color according to the ICC profile corresponding to the set paper type and print quality.
With the proper ICC profile, the color of the LCD monitor and the printed result can be matched. • None: Select this setting to perform color correction in your application software. No color correction is performed on the printer. This function allows you to change a specific color to a specified color. For more details about the spot color setting, see "Spot Color Settings" on page 271 . 90 8 Print Quality 9 Color Correction 10 Spot Color Setting