Chapter3 Handling Select the print quality. When [Media Coating Type] is [Plain Paper] • Max Speed: 300 x 600 dpi • Speed: 600 x 600 dpi (initial setting) • Normal: 600 x 600 dpi • Quality: 600 x 1200 dpi When [Media Coating Type] is [Texture Paper], [Matte Paper], or [Synthetic] • Max Speed: 300 x 600 dpi • Speed: 600 x 600 dpi • Normal: 600 x 600 dpi (initial setting) • Quality: 600 x 1200 dpi When [Media Coating Type] is [Glossy Paper], [Glossy Film], or [High Glossy Paper] • Normal: 600 x 600 dpi • Quality: 600 x 1200 dpi (initial setting) • Max Quality:
1200 x 1200 dpi c IMPORTANT Supported media coating types vary depending on which type of black ink, gloss black or matte black, is installed. For details, see "Paper Specifications" on page 362 . If you change the [Media Coating Type] setting, the [Print Quality] setting will automatically be set to the initial setting suitable for the selected media coating type. Click [Advanced...] to configure more detailed print quality settings. Configure color correction settings. For more details about the color correction, see "Color Correction" on page 276 . • Epson Vivid Color: The color correction engine inside the printer corrects the colors to vivid colors that are suitable for printing labels.
As a result, the colors vary from that of a typical LCD monitor. • Epson Preferred Color: The color correction engine in the printer corrects colors to produce print results that are close to those seen on a typical LCD monitor. • ICM: The color correction engine inside the OS performs color correction according to the ICC profile corresponding to the set media coating type and print quality. The use of an appropriate ICC profile allows you to match the color of the LCD monitor and print result. • None: Select this option when setting color correction on an application software. Color correction is not performed in the printer. Select a spot color setting file.
For more details about the spot color setting, see "Spot Color Settings" on page 270 . 82 9 Print Quality 10 Color Correction Mode 11 Spot Color Setting