Chapter3 Handling Enter the left margin (gap) of the paper. Print area c IMPORTANT It is recommended to set the [Left Gap] to at least 2 mm {0.08 in.}. Setting it to less than 2 mm {0.08 in.} may cause ink to adhere to the inside of the printer and stain printed paper. Enter the right margin (gap) of the paper. Print area c IMPORTANT It is recommended to set the [Right Gap] to at least 2 mm {0.08 in.}. Setting it to less than 2 mm {0.08 in.} may cause ink to adhere to the inside of the printer and stain printed paper. The [Tag Hole Detection] setting allows the printer to detect the paper based on holes, oblong holes, or cutouts in the paper.
Set the distance from the top edge of the hole, oblong hole, or cutout to the edge of the paper. ( "Paper Specifications" on page 370 ) Print area Select the paper type. ( "Paper Specifications" on page 370 ) 95 7 Left Gap (for tag) 8 Right Gap (for tag) 9 Label Edge to Hole Length (for tag) 10 Media Coating Type