Simplicity on the Worksite Solutions Guide for FAQs: E5CC/E5EC Setting Temperature Alarms Set the alarm value with the Key s. 3 Setting Alarm Type 2, 3, 6, 7, 8, 9,10, or 11 (Upper-limit Alarms and Lower-limit Alarms) Setting Alarm Type 1, 4, or 5 (Upper-limit and Lower-limit Alarms or Upper-limit and Lower-limit Range Alarms) Example: Alarm Value 1 = Upper-limit Alarm: 30°C Example: Alarm Upper Limit 1 = 30°C, Alarm Lower Limit 1 = 20°C Alarm Value 1: 30, al-1 (AL-1) Alarm upper limit 1: 30, al1h (AL1H) ON ON SP Alarm ON SP Alarm ON Alarm lower limit 1: 20, al1l (AL1L) ON SP Alarm ON Operation Level Operation Level ← al-1 (AL-1): Alarm Value 1 ← al1h (AL1H): Alarm Upper Limit 1 Alarm value:
30°C (example) Alarm value: 30°C (example) Change the set value with the ( Up and Down) Keys. Change the set value with the (Up and Down) Keys. Setting Temperature Alarms Press the (Mode) Key several times to display al1l (AL1L). ← al1l (AL1L): Alarm lower limit 1 Alarm value: 20°C (example) Change the set value with the (Up and Down) Keys.
If required, use the (Mode) Key and the (Up and Down) Keys to repeat steps 2 and 3 and set the alarm values for al-2 (AL-2) (Alarm Value 2, al-3 (AL-3) (Alarm Value 3), al-4 (AL-4) (Alarm Value 4), al2h (AL2H) (Alarm Upper Limit 2), al2l (AL2L) (Alarm Lower Limit 2), al3h (AL3H) (Alarm Upper Limit 3), al3l (AL3L) (Alarm Lower Limit 3), al4h (AL4H) (Alarm Upper Limit 4), and al4l (AL4L) (Alarm Lower Limit 4). (The number of alarms that is supported depends on the model of Temperature Controller. Some of the alarm parameters may not be displayed.) (When finished, press the (Mode) Key to return to the operation display.) 4-8 Simplicity on the Worksite Solutions Guide for FAQs: E5CC/E5EC K ey (