Chapter 2 Setup Installing to the TM-H6000IV/TM-U675 • The illustrations used here are for DM-D110, but you can still use them as your reference for DM-D210. • Because the illustration used here is for the RS-232/USB model, there are 2 cables. The USB model and RS-232 model have 1 cable. 1 Pass the cable for this product through support C, and attach support C to this product. When using support B for extension, insert the tab on support B into the hole on support C until you feel it click. 2 When using support B for extension 2 Attach the rubber feet to the printer. 45