Ne ewsl ette r B: Not to che eck [Contin nuous alarm m address ] 24/61 Numb er Name Descr iptions Alarm Screen Display It has two types, automatic and manual. When it sets to Automatic: If the alarm is triggered, the alarm screen will immediately pop up. When it sets to Manual: The display of alarm screen is controlled by setting the Action address to 2. Numbe r Na me Descript ions Continuous Alarm Address Uncheck this selection and the Read address will be disabled. According to the alarm type (Bit or Word), each alarm address can be triggered individually. Category It represents the alarm category, which is similar to alarm group. The supported group range is between 1 and 255.
Type The type can be Bit or Word. Bit: Define the Bit address for triggering alarms Word: Define the Word address for triggering alarms Address The triggering method is determined by its type, Bit or Word. When the type is Bit, please enter the Bit address to trigger the alarm. When the type is Word, the alarm can be triggered according to the conditional statement. Conditional Descriptions = equal to > greater than = greater than or equal to C onditional Descriptions = equal to > greater than less than >= greater than or equal to less than or equal to