3-7.4 Blowback Operation Downloaded from https://www.everyspec.com 3-8 Classification by Type of Feed The blowback principle, currently used in sub- machine grins and some automatic guns, derives energy from the pressure of the fired propellent on the cartridge case, causing its rearward projec- tion, to drive the bolt rearward from the barrel. During this rearward movement, the bolt com- presses a spring that, on completion of the recoil travel, returns the bolt to the closed and locked (firing) position. The barrel remains fixed in the receiver.
The initial rearward movement of the bolt is delayed until propellant pressure in the barrel has dropped to a safe magnitude by inertia of the bolt, by mechanical disadvantage (see De- layed Action Bolts, paragraph 3-5.2.2.2.3), or by a positive lock. In a 20mm gun application (see Figure 3-17), a breechblock lock engages a fixed Because of variations between cannon and small arms in size and type of ammunition used, and in their current characteristic types of closure and fl breech operating mechanisms, feeding and loading methods and mechanisms for the two classes are considered separately.
3-8.1 Cannon Feeding Methods 3-8.1.1 Nonautoma tic Feeding Where complete rounds of fixed or semifixed ammunition, or the individual components of sepa- rated or separate loading ammunition, are not ex- cessively large or heavy, the entire series of opera- tions necessary to feed the gun successive rounds may be performed manually by the operator or operators, with the aid of hand manipulated tools or accessories where needed.
The simplest opera- tion is required to load a round of fixed ammuni- tion, requiring no fuze adjustment, into a gun having a vertically sliding breechblock (Figure 3- 14), a procedure consisting of sliding the round forward through the channel in the top of the* breechblock and into the chamber with sufficient force to trip the extractors. (The breechblock then rises by spring action and the gun is ready to fire.) Where justified by size and weight of the round, a loading tray or trough carried by gun crew mem- bers may be used to transport the round and place V it in position behind the breech ring, whence it is pushed into the chamber by a loading rammer in the hands of the gun crew.
The hand loading ram- mer is a straight shaft with a cylindrical head sufficiently concave on the forward face to avoid contacting the cartridge primer. Where separated ammunition is used, the projectile and case are similarly handled in successive operations. Sepa- rate loading ammunition requires successive inser- tion and ramming of the projectile, insertion of bags of propellant, and manual replacement of a fired primer case by an unfired primer in the primer block. If a projectile requiring fuze ad- justment is used, the fuze is manually adjusted (using an appropriate wrench) to the proper inter- val before the projectile is inserted.
The closing of the interrupted screw-type breech used with separate loading ammunition is also initiated by manual operation of a lever. Figur« 3-17. Boll Unlocked to Permit Blowback Opening. (Lock Raised from Engagement with Breechblock Key) cross member of the receiver (breechblock key) to latch the bolt-type breechblock in closed position. Sliding members in the breechblock (breechblock slides) bar disengaging movement of the lock.
When the fired propellant has moved the projectile forward past a small lateral port in the bore, gas passes through the port to drive a piston rearward, this movement being transmitted by push rods to move the breechblock slides rearward and so permit disengagement of the lock. The lock, bearing on the breechblock key at an unfavorable angle, is forced upward out of engagement by rearward pressure of the breechblock, and the latter is then driven rearward by the residual propellant pres- sure on the cartridge case.
In the submachine gun application, a bolt lock is not used, as bolt inertia provides sufficient delay for adequate drop in pres- sure of the relatively low powered propellant charge used. 3—16