Downloaded from https://www.everyspec.com through the rammer speed reducer, to the tray- operating cam under the tray. A partial revolu- tion of the cam swings the tray sideward and down- ward about its trunnions to align the projectile with the gun bore. The tray then dwells while the rammer arm, pivoted on the outer front corner of the tray, swings across the tray and sweeps the cartridge, and the projectile ahead of it, forward into the gun chamber. Entry of the cartridge trips the extractors to permit the closing spring to raise the breechblock and to close the breech.
The com- pletion of one revolution of the cam then effects return of the rammer arm and tray to starting position, and actuates a linkage to disengage the rammer clutch. A brake and positive lock arrange- ment prevent over-rotation of the cam and acci- dental repeat cycling. 3-8.1.2.4 Combined Fuze Setter-Rammer Another typical example (Figure 3-21) of pow- ered fuze setter-rammer combination (for time- fuzed fixed ammunition) presents a somewhat closer integration of the fuze setting and ramming operations.
When applied to a vertically sliding breechblock type of gun, the combination effects automatic operation through the cycle for each round, with manual operation required only to place the round in the feeding trough to slide it forward into engagement between the rammer rollers, and to trip the firing mechanism after the breech closes. A manual fuze setter release ar- rangement is included to enable use of ammunition not requiring the fuze setting operation, and man- ual loading is feasible in case of malfunction of the power rammer mechanism. Figur» 3-27. Combination Fuze Setter and Rammer {Schematic) 3—20