Downloaded from https://www.everyspec.com 5-4 Form of Charge rear of the chamber. The perforated portion of the metal case is sealed by an unperforated combustible liner until the liner is destroyed by firing the round. The propellant charge is subjected to several variations in form for adaptation to the type of gun and the performance characteristic required (see also paragraph 3-3 and subparagraphs there- under). The following principal forms are in- cluded. (b) The cartridge case is not perforated, and fits the contours of the gun chamber.
The rear end wall (base) of the case, instead of all-metal construction, incorporates a disk of a composition that disintegrates under the heat and pressure of the propellant gases, and so permits rearward esaape through a central orifice. A further varia- tion combined with this, design of case is the for- mation of the propellant charge by stacking a large number of thin washer-like flat disks of propellant behind the projectile on the axial boom that carries the projectile stabilizing fins. Bach disk has "dim- ples" embossed on one face to space the disks and expose both surfaces for ignition and combustion.
The outside diameters of the disks are substantially less than the inside of the base and are progres- sively smaller toward the rear, to reduce obstruc- tion of gas flow to the rear orifice. 5-4-1 Cased Charges These charges are contained in a cartridge case, including a primer extending forward from the rear end of the case sufficiently to obtain satisfac- tory ignition. An ignition charge may be included to aid in speeding ignition of all portions of the propellant. For closed-breech gun the case con- tour closely fits the gun chamber and the case provides obturation against rearward escape of propellant gases. Variations include the following:
(1) For fixed ammunition, in which the case is firmly attached to the projectile, the charge is enclosed without provision for subsequent dis- assembly. (2) For semifixed ammunition, in which the case is loosely fitted to the rear of the projectile, the propellant is bagged in portions or otherwise separated into a basic charge and increments, the latter removable to adjust the propellant charge for zone firing. 5-4.2 Noncased Charges These are contained in one or more combustible bags instead of a cartridge case. Guns utilizing these charges must provide for obturation against rearward escape of gases by features built into the gun breech (see paragraph 3-3.4).
Variations in- clude the following: (3) For separated ammunition, in which the case and projectile are separate units, separately handled until chambered in the gun or inserted into a mechanical loader-rammer, the full charge of propellant is securely sealed by a plug in the forward end of the case. No provision for zone firing is made. (1) Complete propellant charge in one bag. This arrangement may be used where the resulting size and shape is suitable for handling and loading.
One or more elements of ignited material (usually black powder), formed as end pads or as a central core, are fixed within the propellant bag to aug- ment the primer flame in effecting thorough igni- tion of the entire mass of propellant. The pro- pellant bag (sometimes termed cartridge bag) constitutes one unit of separate loading ammuni- tion, in which the projectile, propellant and primer are separately inserted into the gun. (4) For open^breech guns (recoilless types), in which rearward discharge of a portion of the propellant gases produces recoil-neutralizing forces, a path must be provided for gas flow to the vents at the rear of the chamber.
Present practice in- cludes two methods, indicated below: (a) The cartridge case is of smaller diame- ter than the gun chamber, except at the forward end, where the case is confined in the transition from chamber to rifled bore, and the projectile rotating band is fitted into the rifling of the bore. The metal case walls are perforated to permit escape of gas into the annular space between case and chamber wall and thence to the orifices at the (2) Propellant charge in two or more bags. (a) This arrangement is used in separate loading ammunition either to divide the propellant into portions more easily handled in gun loading, or to provide a basic charge and increments for zone firing.
An ignition charge may be included in the basic charge only, or in the increment