US Army Materiel Command AMCP 706-341 — Engineering Design Handbook — Carriages and Mounts Series: Cradles (EN)

4 Downloaded from https://www.everyspec.com CARRIAGES AND MOUNTS SERIES CRADLES* I. INTRODUCTION c. FUNCTIONS 3. The cradle is one of the tipping parts A. GENERAL and serves as the supporting structure for all 1. This is one of a series of handbooks on other tipping parts. Its primary function is to Carriages and Mounts. This handbook deals support the gun tube. It provides the guides with the design of cradles, or tracks on which the tube slides during recoil and counterrecoil. It anchors the recoil mechanism. It prevents the tube from ro- B. PURPOSE tating. It transmits all firing loads, including 2.

The cradle was fist introduced in those due to recoil, tube whip, and rifling 2.dnThe Coradle asphlt inrduc in3 torque, to the carriage. It provides the base for Ordnance Corps Pamphlet ORDP 20-340t mounting sighting equipment. Figure 1 shows where it was discussed as one of the elemens that make up a carriage or mount. This atypical cradle installation on a weapon. handbook deals specifically with the cradle. The various types are discussed along with II. EQUIPMENT ASSOCIATED their components and pertinent design data. WITH CRADLES * Prepared by Martin Regina, Laboratories for Research and Development of The Franklin Institute. A. RECOIL MECHANISM t Reference 1.

References are found at the end of this handbook. 4. The fixed part of the recoil mechanism EQUILIBRATOR CRADLE BOI Figure 1. Weapon Showing Typical Components 1 i