US Army Materiel Command AMCP 706-341 — Engineering Design Handbook — Carriages and Mounts Series: Cradles (EN)

Downloaded from https://www.everyspec.com LIST OF SYMBOLS Ab bore area m 2 mass of secondary recoiling parts a linear acceleration of projectile N, twist of rifling in calibers per turn as peripheral acceleration of projectile P. propellant gas pressure a? acceleration of the secondary recoiling p induced pressure of shrink fit mass in a double recoil system R secondary recoil force; radius c distance from vertical axis to outermost Rb radius of bore fiber R, elevating gear.

load CG center of gravity R, pitch radius of elevating arc d distance of neutral axis from base of R, normal reaction of front bearing section R 2 normal reaction of rear bearing E modulus of elasticity r equilibrator moment arm; radius FA trunnion force parallel to axis of bore S1 factor of safety F. inertia force of recoiling parts in a single T, rifling torque recoil system or of the primary recoiling V vertical force or load parts in a double recoil system W weight, recoiling parts, single recoil system; F, inertia force of cradle induced ring load Fz equilibrator force W.

weight of cradle F propellant gas force W, weight of recoiling parts in a single re- FN trunnion force normal to azms of bore coil system or of the primary 'recoiling Fr resultant trunnion force parts in a double recoil system F, inertia force of primary recoiling parts W 2 weight of secondary recoiling parts in a due to secondary recoil double recoil system ( ) F 2 inertia force of secondary recoiling parts w unit load f, frictional resistance of front bearing, Z section modulus f2 frictional resistance of rear bearing a angular acceleration of projectile H horizontal force of load A deflection; radial interference I moment of inertia of section AD diametral deflection I, mass moment of inertia of projectile 8 angle of elevation; angular deflection; K total resistance to recoil location of ring load Ki force provided by the recoil mechanism 0, helix angle of rifling K.

slenderness factor A coefficient of friction k radius of gyration of projectile I Poisson's ratio L length or distance a stress, general M moment 9b, bearing stress 7MT moment about trunnion a, compressive stress Me moment at the load at tensile stress m, mass of prcviectile r shear stress m 1 mass of primary recoiling parts vi