Downloaded from https://www.everyspec.com From Equation 30 M. = WR[.- sino] = 112,800 X 8.25 X (-0.074) -68,800 lb-in From Equation 31 my4( = - (R_ 1) cos 0 + ~-sin 8] = 112,800 X 8.25 x 0.038 = 35,400 lb-in From Equation 32 wR. [20 D= I - sin 0+ ;Cos 6 112,800 X 562 0.096. = 2 X 0' X 0.044 = i'n- - 29 x10 I From Equation 33 112,800 X 562 0.081. = x i10i (-0.037)= -- in 72. A compaison of the required wall thick- 8 ness for the two conditions shows that the Ge - = 38,400 lb/in 2 , equivalent stress tangential gussets are preferred. For the S - 60,000 1.56, factor of chordal gussets, the maximum equivalent as T_00 safety. ( stress is at 0 (see Sketch (a) of Figure 27).
For the tangential gussets, the maximum The dimensions of the cradle wall at this loca- equivalent stress is located on the x-axis where tion are the general bending stress is zero. Thus b = 5.46 in, assumed ring width (Figure 23) 1 c = 8.78 in, chordal distance to gusset Z = bt 2 2.05 in " R, = 7.5 in, inside radius v R. = 9.5 in, outside radius o,= -o =T = 33,500 lb/in 2 t = 2.0 in, wall thickness M, = 119,700 lb-in (see Paragraph 70) where M1 =-68,800 lb-in (see Paragraph 63) Z bt 2 = 3.64 in 3 , section modulus b = 5.46 in, assumed ring width (Figure 23) t = 1.5 in, wall.thickness O.
= - MO/Z = -32,800 lb/in2 Ro.= 9.0 in, outer radius of cradle wall I = (R - RID) = 3910 in The wall thickness of 1.5 inches is preferred over that of 2.0 inches, thus demonstrating the The general bending moment is taken from advantage of tangential gussets. the Shear and Moment Chart (Paragraph 69). 73. The bearing pressure induced by the At Station 5 gusset load is found according to the method M = 2,473,000 lb-in discussed in Paragraph 52. By equating the expressions for AD, 'in Equation 39 and Para- S 43910 - 5600 lb/in2 graph 71, we have (-.6)wR- WR-3(007 From Equations 15a and 15b (-0.467) E W -I7 30