US Army Materiel Command AMCP 706-341 — Engineering Design Handbook — Carriages and Mounts Series: Cradles (EN)

Downloaded from https://www.everyspec.com IW () GUSSET- CRADLE BODY'-, Re 5.96 1 Figure 29. Gusset Load Diagram According to Equation 17, Ra = 28,000 1b, () CHORDAL GUSSETS the total horizontal load on each gusset. From Equations 17b and .17e GUSSET Rh R = (a - I c) FA 2.4 X 111,800 rA A 2.75 X4 = 24,400 lb the vertical load and reaction on the gusset. According to Equation 18, - =w 2x28,000 16,200 lb/in, maximum( "' = .45 =linear load For a thickness of t = 0.5 in, the direct WELD tensile or compressive stress between gusset M TANGENTIAL GUSSETS and hub is )TNEITLGUST Figure 30.

TNrnnion Housing (e With Gusset Reinforcement a -7 = 32,400-.b/in (see Equation 19) S1=60,000 =15 The direct shear stressi =i = 1.59 RA 24,400 From Equation 17f 0. c 0.5 X 345 14,100 lb/in? rA 2.75 b c =1-75X 3.45 = 3.96 in The combined shear stress is a- c 2.4 Ithe required gusset length for the attachment 1x -4 1 + r= 21,500 lb/in' to the cradle bcdy. The stresses here are Thm obviously less than those between gusset and The combined tensile or compressive stress is trunnion hub. 77. The effects of the gussets on the cradle + 37,700 lb/in 2 wall are discussed in Paragraph 50.

In Figure 29, R, represents the load W of Coidition (b), With a tensile yield strength of 60,000 Paragraph 50, and the chordal gussets in lb/in', the shear and tensile factors of safety Figure 30a. are, respectively, a = 2 in 0 = 0.237 radian Is = .6 X 60,000 = 1.67 h = 3.45 in sin e = 0.235 21,500 R, = 8.5 in cos 0 = 0.972 32( ) I S 'S "S.