US Army Materiel Command AMCP 706-341 — Engineering Design Handbook — Carriages and Mounts Series: Cradles (EN)

Downloaded from https://www.everyspec.com The strength of the rail or slide is determined where according to Paragraph 32 and Figure 17, r, = 75 in 0 = 60, angle of elevation Assume that rail and slide have identical cross- r, = 25 in ot = 0004 ' sectional dimensions W 000l 2=-0 a = b = 0.75 in W, = 4000 lb d = e = 2.25 in The equilibrator force is found by equating F = 1.0w = 1230 lb the equilibrator moment to the weight mo- A = 1.0 X 0.75 = 0.75 in 2 ment. Sc 6 1.0 x 0.752 =0.0937 in' rF,, = M. = 461,000 lb-in From Equation 11 F;: = 38,400 lb, equilibrator force M = eF = 2770 lb-in when r = 12 in M F 85.

The equilibrator attachment to the T= - + - = 29,600 + 1600 = 31,200 lb in cradle is similar to the trunnion housing of Figure 31. Its location is designated in the S' = 31,00=- 1.92 force diagram of Figures 8 and 32. The loads '31,200 on the primary cradle structure are 2. Equilibrator Load R, = Ff cos (0 - 1) + 1 Fn sin (0 - X) 12 2~o( )+Fsn( 84. Calculate the equilibrator force, Fj,, by balancing the weight moment of the tipping -X 37,200 + X 10,000 = 17,100 lb parts about the trunnions. Referring to 12 2 Figure 8 1 F-, cos (0 - 2 Fp.

sin (0 - X) M = r 1 W cos (6 + o,) + rW, cos (0 + 52) 1) = 461,000 lb-in = 12,100 - 5000 = 7100 lb HOUSING TRUNNION HOUSING , J J FN +B Thi 4 FAFi 9 r_ "' 18 LN + RAI Figure 31. Trunnion Housing and Cross Section of Cradle " :;F'28 4 353! V