US Army Materiel Command AMCP 706-341 — Engineering Design Handbook — Carriages and Mounts Series: Cradles (EN)

Downloaded from https://www.everyspec.com R tTRUNNIN I R t R 12 14 ~-) 38-.--5 ,9 9 'i) - . NEUTRAL A-XIS -- 5W'i(- 0 f 55-1 12 6O (6Ri Figure 32. Applied Loads on Cradle 0= F cos (8 - X) = 37,200 lb 87. With reference to Figures 8 and 33, the the15 *where x = 450 (se Paragraph 86). loads at the attachments of elevating arc to cradle are calculated by redolving the gear 3. Eevatng Cear oad oth load about these attachments. Take 3. Eevatng Gar ~moments about the intersection of BR and 86. The reaction on the elevating gear arc, RRI,, the shear reaction on the key, and solve R 0 , is found by balancing the moment about for R,t .. tetrunnions. Additional dimensions for 2OR,,,. = 4.3R.

co (8 +/ + 7) () Figure 8 are: + A4Rlisin (8 + + Ca) S=5 ° a =0.10in = 4.3 X3700 +14 X4400= 77,500 7 =50 ° b =0.2 in R,L =3900 lb = 200, pressure angle of gear tooth R t RRL + r cos 8 + + ) = 7600 lb re = 36 in, pitch radius of elevating arc Rtoi =R sin (8 + + .) 44C0 lb The applied loads and dimensions are those The bolts and key size required to transmit previously used in this sample problem. With reference to Figure 5a, the trunnions are lo- cated 5.0 inches to the left of u.

oR x M 7 = 0 R R n cos s - rF i + rfW cos (8 + +y)) + a(F - W sin +) - r1W4 cos (0 + ) _y R R X cos i = 36 X .940R 33.8R rF ' 00 00 = 461,000 X 3_ 0 , The ppled oadsanddimnsios ae tose The olt an keysiz reuire totrasmi rW, cos (8 + €2) = 25 X 3460 = 87,000 o. a(F 0 - Wsin8) = 0.10 )'1,660,000 = 166,000 , r 1 W 1 cos (0 + 4) = 75 X 10,000 X .499"\ = 374,000 bFb = 0.20 X 1,810,000 = 362,000 4400 33.8R 2 0 = 196,000 lb-in R = 5800 eb Figure 33. Loads on Elevating Arc 36