US Army Materiel Command AMCP 706-117 — Environmental Series, Part Three: Induced Environmental Factors (EN)

Downloaded from https://www.everyspec.com F AMCP 706-117 OZONE GENERATOR CAPILLARY RESTRICTOR~~.. ) ~~CONVERSION r-- RO CHAMRERME.. ROTA METER MIXING C OMPRESSED C HAMBER-ttJ 48.6 ppm -. ~~~NO IN --. j I TO NITROGEN CALIBRATION MANIFOLD FIGURE 2.27. Nitric Oxide and Nitrogen Dioxide Calibration Systern lent to the reference methods (Ret. 36). Table 2-17 lists fully controlled. Under controlled conditions, concen- the referenee methods and averaging times a specified. trations of sulfur dioxide in the range of 0.01 to 0.40 (1) Sutfur dioxide. The reference method for the ppm can be measured.

determination of sulfur dioxide in the atmosphere is the (2) Particulate matter, The high volume sampler pararosaniline method utilizing the calorimetric detec- method is the reference method for sampling larige tion principle, volumes of air for suspended particulates. The sampler Sulfur dioxide is absorbed from the air sample in a operates somewhat like a vacuum cleaner. The essential solution of potassium tetrachloromercurate (TCM) components are a filter and a vacuum pump, Dust. forming a dichlorosulfltomercurate complex. This laden ambient air is drawn through the filter where the complex is reacted with pararr-_ailine and formalde- particulate matter is trapped.

The usual procedure is to hyde to form the intensely colored pararosaniline weigh the filter before and after the sampling period methyl sulfonic acid. The abeorbance of the solution is and use the average airflow rate through the filter to measured spectrophotometrically. give an average concentration in weight per unit This method has serious shortcomings and the valid- volume (units are usually 1Ag m 3). The sample may be ity of the measurements is subject to question unless used for other analyses such am particle count, particle temperature, pH, and purity of the reagents are care- size, particle shape, or chemical composition. 248