For example, :DISPlay:GBRightness 60 /*Set the screen grid brightness to 60%*/ :DISPlay:GBRightness? /*The query returns 60*/ :DECoder command subsystem The :DECoder command is used to perform settings and operations related to decoding tables. :DECoderMODE For example, :DECoder1: MODE SPI /*Set the decoder type to SPI*/ :DECoder1: MODE? /*The query returns SPI*/ :DECoder:DISPlay For example, :DECoder1:DISPlay ON /*Turn on decoder 1*/ :DECoder1:DISPlay? /*The query returns 1*/ :DECoder:POSition 32 / 136 Parameter Name Type Range Default Integer 0 to 100 50 Return format The query returns an integer between 0 and 100. Command format :DECoder:MODE :DECoder:MODE?
Function description Sets or queries the type of decoder. Parameter Name Type Range Default Discrete {UART|LIN|CAN|SPI|IIC} UART Description UART, SPI, IIC, CAN, LIN correspond to UART decoding, SPI decoding and IIC decoding. LIN decoding, CAN decoding. Return format The query returns UART, LIN, CAN, SPI or IIC. Command format :DECoder:DISPlay :DECoder:DISPlay? Function description Turn decoding function on or off, or query decoding function. Parameter Name Type Range Default Bool {{1|ON}|{0|OFF}} 0|OFF Description Only when the corresponding trigger is entered can the corresponding decoding be performed. Return format The query returns 1 or 0.
Command format :DECoder :POSition :DECoder :POSition? Function description Sets or queries the vertical position of the bus on the screen. Parameter Name Type Range Default Integer 0 to 400 50 Description Divide the screen vertically into 400 parts, from 0 to 400 from top to bottom.