:SYSTem:SETup0 SYSTem:DATE For example, The following command sets the system year, month, and day to August 8, 2018 :SYSTem: DATE 2018, 8, 8 /*Set the date of the oscilloscope to August 8, 2018*/ :SYSTem: DATE? /*The query returns the date as August 8, 2018*/ 55 / 136 Command format :SYSTem:SETup _ :SYSTem:SETup? Function description Import the oscilloscope setup parameters to restore the oscilloscope to the specified settings. Query the oscilloscope settings. Parameter Name Type Range Default _ Refer to description Description The oscilloscope settings here correspond to “Setup Storage” under Storage Type. Set parameters for the specified oscilloscope.
It is the return _ value obtained by querying with the: SYSTem: SETup? Command. It cannot be set manually. For the specific format, please refer to the return format below. The main function of this command is to facilitate users to remotely export / import oscilloscope settings. To export the setup parameters of the oscilloscope under the specified settings, use the: SYSTem: SETup? Command to query and save the return value to a file. When you need to restore the oscilloscope to the specified settings later, you can import the oscilloscope setup parameters through the: SYSTem: SETup command _ (note that must be the return value obtained by previous _ query).
Return format The returned data consists of two parts, namely the TMC data description header and the setup data. The format of the TMC data description header is #NXXXXXX. Among them, # is an identifier; N is less than or equal to 9, and the N data that follows it represent the length (byte number) of the data stream. Such as # 9000002077, where N is 9, followed by 000002077 means that there are 2077 bytes of valid data at the end. The setting data is represented in binary form. Command format SYSTem:DATE , , SYSTem:DATE？ Function description Set the year, month and day of the system.
Parameter Name Type Range Default Integer 4 digits 2018 Integer [1-12] 1 Integer [1-31] 1 Description The returned string contains 3 segments separated by commas: year, month, day.