SYSTem:TIME For example, The following command sets the system hours, minutes, and seconds to 6: 6: 6 :SYSTem:DATE 6, 6, 6 /*Set the time of the oscilloscope to 6: 6: 6*/ :SYSTemDATE? /*Query return time is 6: 6: 6*/ SYSTem:COMMunicate The :COMMunicate command is used to set LAN and WLAN. SYSTem:COMMunicate: :AUTOip[:STATe] For example, :SYSTem:COMMunicate:LANAUTOip ON /*Turn on AUTOIP mode*/ :SYSTem:COMMunicate:LAN:AUTOip? /*The query returns ON*/ SYSTem:COMMunicate: :DHCP[:STATe] 56 / 136 Command format SYSTem:TIME , , SYSTem:TIME？ Function description Set the hour, minute and second of the system.
Parameter Name Type Range Default Integer [0-23] 6 Integer [0-59] 6 Integer [0-59] 6 Description The returned string contains 3 segments separated by commas: hour, minute, second Command format SYSTem:COMMunicate: :AUTOip SYSTem:COMMunicate: :AUTOip ? Function description Turns the automatic IP mode (AUTOIP) on or off. Query the status of the AUTOIP mode. Parameter Name Type Range Default Discrete {WLAN|LAN} LAN Discrete {OFF|ON} ON Description The machine needs to be equipped with LAN when setting up the LAN The machine needs to be equipped with WLAN when setting up WLAN Return format Returns the status of AUTO IP Command format SYSTem:COMMunicate: :DHCP SYSTem:COMMunicate: :DHCP ?
Function description Turn dynamic IP mode (AUTOIP) on or off. Query the status of the dynamic IP mode. Parameter Name Type Range Default Discrete {WLAN|LAN} LAN Bool {OFF|ON} ON Description The machine needs to be equipped with LAN when setting up the LAN The machine needs to be equipped with WLAN when setting up WLAN