For example, :TRIGger:RUNT:WHEN LESS /*Set the qualifier to :TRIGger:RUNT:WHEN? /*The query returns LESS*/ :TRIGger:RUNT:TIME For example, :TRIGger:RUNT:TIME 0.02 /*Set the upper limit of the pulse width to 20ms*/ :TRIGger:RUNT:TIME? /*The query returns 2.000000e-02*/ : TRIGger: RUNT: ALEVel For example, :TRIGger:RUNT:ALEVel 0.16 /*Set the trigger level upper limit to 160mV*/ :TRIGger:RUNT:ALEVel? /*The query returns 1.600000e-01*/ :TRIGger:RUNT:BLEVel 81 / 136 GREAt ＞ (greater than the time value): Only when the positive or negative pulse width of the input signal is greater than the set pulse width can it trigger [pulse width error is 5%].
LESS Return format The query returns EQUAl, NEQUal, GRAt, LESS Command format :TRIGger:RUNT:TIME :TRIGger:RUNT:TIME? Function description Set or query the trigger time. The default unit is s. Parameter Name Type Range Default Integer 8ns to 10s 20ns Command format :TRIGger:RUNT:ALEVel :TRIGger:RUNT:ALEVel? Function description Set or query the upper limit of the trigger level when the runt pulse is triggered. The unit is the same as the current amplitude unit. Parameter Name Type Range Default Integer (-5 × VerticalScale - OFFSet) to (5 × VerticalScale - OFFSet) 2V Description This setting command is valid only when the selected source is an analog channel.
Return format The query returns the upper trigger level in scientific notation. Command format :TRIGger:RUNT:BLEVel :TRIGger:RUNT:BLEVel? Function description Set or query the lower limit of the trigger level when the runt pulse is triggered. The unit is the same as the current amplitude unit. Parameter Name Type Range Default Integer (-5 × VerticalScale - OFFSet)to (5 × VerticalScale - OFFSet) 0 Description This setting command is valid only when the selected source is an analog