For example, :TRIGger:LIN:SOURce CHANnel1 /*Set the trigger source to CH1*/ :TRIGger:LIN:SOURce? /*The query returns CHANnel1*/ :TRIGger:LIN:IDLe For example, :TRIGger:LIN:IDLe LOW /*Set idle low level*/ :TRIGger:LIN:IDLe? /*The query returns LOW*/ :TRIGger:LIN:BAUd For example, :TRIGger:LIN:BAUd 4800 /*set the baud rate is 4800*/ :TRIGger:LIN:BAUd? /*The query returns 4800*/ :TRIGger:LIN:CONdition 92 / 136 CHANnel3|CHANnel4} Description When the digital channel is used as the trigger source channel, the digital probe must be connected to the oscilloscope.
Return format The query returns D10, D11, D12, D13, D20, D21, D22, D23, D30, D31, D32, D33, D40, D41, D42, D43, CHAN1, CHAN2, CHAN3, CHAN4. Command format :TRIGger:LIN:IDLe :TRIGger:LIN:IDLe? Function description Set or query the idle level triggered by LIN Parameter Name Type Range Default Discrete HIGH Description HIGH: idle high LOW: idle low Return format The query returns LOW, HIGH Command format :TRIGger:LIN:BAUd :TRIGger:LIN:BAUd? Function description Set or query the baud rate triggered by LIN. The default unit is bps. Parameter Nam e Type Range Default Discrete 9600 Return format The query returns an integer Command format :TRIGger:LIN:CONdition :TRIGger:LIN:CONdition?
Function description LIN trigger conditions set trigger or queries Parameter Name Type Range Default Discrete Description → contact field slope interval ends when the edge trigger interval after the end of LIN. Sync field end → LIN sync field data reception completion trigger.