DVP-ES3 Series Operation Manual *1: If the input signal exceeds the hardware input limit, the module only shows the maximum value. If the input signal is below the lower limit, it only shows the minimum value. *2: If the input signal exceeds the hardware input limit, it also exceeds the digital conversion limit and a conversion limit error appears. For example in the voltage input mode (-10 V to +10 V), when the input signal is 10.15 V, exceeding the hardware upper limit, it also exceeds the conversion upper limit. The module uses the upper limit value (32387) as the input signal and a conversion limit error appears. _2 *3:
If an input signal exceeds the absolute range, it might damage the channel. DVP02DA-E2/DVP04DA-E2 Electrical specifications *1: The module is with short circuit protection, but if the duration of a short circuit is too long, it can cause circuit damage. Current output can be open circuit. Things to note when connecting the module to a CPU PLC module: 1. Up to 8 modules can be connected to a CPU PLC module. 2. The connected module is numbered automatically from 0 (nearest to the CPU PLC module) to 7 (furthest away from the CPU PLC module). 3. The connected modules do NOT take up any digital I/O points.
Functional specifications 2-17 Module name DVP02DA-E2 DVP04DA-E2 Number of outputs Two Four Analog-to-digital Voltage output/Current output conversion Supply voltage 24 VDC (20.4 VDC–28.8 VDC) (-15% to +20%) Connector type Removable terminal block (distance to the terminal is 5 mm) Conversion time 400 μs /channel Short cicuit Yes protection*1 Weight 194 g 207 g Digital/analog module Voltage output Current output Rated output range -10 V ~ 10V 0 ~ 20 mA 4 mA ~ 20 mA Digital conversion range -32,000 ~ +32,000 0 ~ +32,000 0 ~ +32,000 Digital conversion limit -32,768 ~ +32,767 0 ~ +32,767 -6,400 ~ +32,767 Hardware resolution 14-bit 14-bit 14-bit Maximum output current 5 mA － Load impedance 1K Ω ~ 2M Ω 0 ~ 500 Ω Output impedance 0.5 Ω or lower 25° C/77° F:
The allowed error range is ±0.5% of full scale. 0° C to 55° C/-32° F to 131° F: The allowed error range is ±1% of full scale. Overall Accuracy Digital data format 16-bit two’s complement number