DVP-ES3 Series Programming Manual 3.1 Types of Instructions Instructions used in the DVP-ES3 Series PLC include basic instructions and applied instructions.
_3 3.1.2 Applied Instructions 3-2 3 .1.1 Basic Instructi Classification o ns Description Contact instructions Instructions such as loading the contact, connecting the contact in series, and connecting the contact in parallel Output instructions Bit device output; pulse output Master control Instructions Setting and resetting the master control Rising-edge/Falling-edge detection contact instructions Triggering the instructions that load the contact, connect the contacts in series, and connect the contacts in parallel Rising-edge/Falling-edge differential output instructions Bit device differential output Other instructions Other instructions API Classification Description 0000-0083 Comparison instructions Comparisons such as =, , >, >=, 0100-0118 Arithmetic instructions Using binary numbers or binary-coded decimal numbers to add, subtract, multiply, or divide 0200-0217 Data conversion instructions Converting a binary-coded decimal number into a binary number, and converting a binary number into a binary-coded decimal number 0300-0310 Data transfer instructions Transfer the specified data 0400-0402 Jump instructions Control jumps to a different part of the program 0500-0504 Program execution instructions Enabling or disabling the interrupt 0600-0602 I/O refreshing instructions Refreshing the I/O 0700-0711 Miscellaneous instructions Instructions such as those that apply to the counters, the teach mode timers, and the special timers 0800-0817 Logic instructions Logical operations such as logical addition and logical multiplication 0900-0904 Rotation instructions Rotating/Shifting the specified data 1000-1011 Basic instructions Timer instructions and counter instructions 1100-1115 Shift instructions Shifting the specified data 1200-1226 Data processing instructions 16-bit data processing such as decoding and encoding 1300-1302 Structure creation instructions Nested loops 1400-1410 Module instructions Reading the data from a specific module and writing the data into a specific module 1500-1517 Floating-point number instructions Floating-point number operations 1600-1608 Real-time clock instructions Reading and writing, adding, subtracting and comparing the time 1700-1704 Peripheral instructions I/O points connected to the peripheral 1806-1820 Communication instructions Controlling the peripheral though communication 1900-1906 Other instructions Watchdog timer, program delay timer, pulse width, and index registers