Chapter 3 Instruction Tables 3_ 3.2 Understanding Instruction Tables This section describes the table format that this chapter and the rest of this manual uses to describe each instruction. The format is different depending on the type of instruction: Basic or Applied. 3.2.1 Basic Instructions This section describes the table format that this chapter uses to describe basic instructions in Section 3.3. Description: : The instruction name : The symbol for the instruction in the ladder diagram in ISPSoft : The function of the instruction :
The operands supported by the instruction 3-3 API Classification Description 2100-2119 String processing instructions Conversion between binary or binary-coded decimal numbers and ASCII codes; conversion between binary numbers and strings; conversion between floating-point numbers and strings; string processing 2200-2212 Ethernet instructions Controlling the Ethernet data exchange 2300-2304 Memory card / File register instructions Reading the data from the memory card / file register and writing the data to the memory card / file register 2400-2401 Task control instructions Controlling tasks in the program 2500-2502 Sequential function charts (SFC) instructions Controlling the SFC instructions 2700-2724 High-speed output instructions High-speed output and position control instructions 2800-2812 Delta special CANopen communication instructions CANopen communication instructions especially for Delta devices