Chapter 6 Applied Instructions 4. The following graphic shows the DIP switches. 10 0 10 1 10 2 10 3 Bi nary coded deci mal - w iri ng of D IP swi tches A dio de 1N4148 ) must ( be connected in ser ies. + 1 2 4 8 1 2 4 8 10 10 10 3 2 1 1 0 0 1st DIP switch 2nd DIP switch Note: The transistor output module is used in this example. Additional remarks 1. If n exceeds the range, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#200B. 2. If you declare the operand D 1 in ISPSoft, the data type is ARRAY [4] of BOOL. 6_ 6-517 X0 X1 X2 X3 X4 X5 X6 X7 S/S Y3 Y2 Y1 Y0 C 0