2 Functions of Devices in DVP-PLC DVP-PLC Application Manual 2-61 ES SA Off STOP RUN EH2 EH3 Special D Function EX SX Attribute Latched Default SV SV2 SS SC On RUN STOP D1175* High 16 bits of target numbers of 2-phase output pulses (Not available in SX V3.0 and above) ╳ ○ ╳ ╳ 0 - - R/W NO 0 X10 speed detecting value ╳ ╳ ○ ○ 0 0 - R/W NO 0 D1176* Low 16 bits of current numbers of 2-phase output pulses (Not available in SX V3.0 and above) ╳ ○ ╳ ╳ 0 - - R/W NO 0 X14 speed detecting time ╳ ╳ ○ ○ 0 0 - R/W NO 0 D1177* High 16 bits of current numbers of 2-phase output pulses (Not available in SX V3.0 and above) ╳ ○ ╳ ╳ 0 - - R/W NO 0 X14 speed detecting value ╳ ╳ ○ ○ 0 0 - R/W NO 0 D1178* VR0 value ╳ ○ ○ ○ 0 - - R NO 0 D1179* VR1 value ╳ ○ ○ ○ 0 - - R NO 0 D1180* SA/SX:
When X2 interruption (I201) occurs, immediately extracting the low 16 bytes from X0 high-speed counting value. (Only supports V1.8 and above versions.) SC: When X4 interruption (I401) occurs, extracting the low 16 bytes from high-speed counting value. (Only supports V1.8 and above versions.) ╳ ○ ╳ ╳ 0 0 - R/W NO 0 Enabling X2 to get the counting value of the high-speed counter C241 (M1057 is On)(Low word) ╳ ╳ ╳ ○ 0 0 - R NO 0 D1181* SA/SX: When X2 interruption (I201) occurs, immediately extracting the high 16 bytes from X0 high-speed counting value. SC: When X4 interruption (I401) occurs, extracting the high 16 bytes from high-speed counting value.
╳ ○ ╳ ╳ 0 0 - R/W NO 0 Enabling X2 to get the counting value of the high-speed counter C241 (M1057 is On)(High word) ╳ ╳ ╳ ○ 0 0 - R NO 0 D1182 Index register E1 ╳ ○ ○ ○ 0 - - R/W NO 0 D1183 Index register F1 ╳ ○ ○ ○ 0 - - R/W NO 0 D1184 Index register E2 ╳ ○ ○ ○ 0 - - R/W NO 0 D1185 Index register F2 ╳ ○ ○ ○ 0 - - R/W NO 0 D1186 Index register E3 ╳ ○ ○ ○ 0 - - R/W NO 0 D1187 Index register F3 ╳ ○ ○ ○ 0 - - R/W NO 0 D1188 Index register E4 ╳ ╳ ○ ○ 0 - - R/W NO 0 D1189 Index register F4 ╳ ╳ ○ ○ 0 - - R/W NO 0 D1190 Index register E5 ╳ ╳ ○ ○ 0 - - R/W NO 0 D1191 Index register F5 ╳ ╳ ○ ○ 0 - - R/W NO 0 D1192 Index register E6 ╳ ╳ ○ ○ 0 - - R/W NO 0 D1193 Index register F6 ╳ ╳ ○ ○ 0 - - R/W NO 0 D1194 Index register E7 ╳ ╳ ○ ○ 0 - - R/W NO 0 D1195 Index register F7 ╳ ╳ ○ ○ 0 - - R/W NO 0 D1196 Content in the display (available in SX) ╳ ○ ╳ ╳ 0 - - R/W NO 0 D1197 Refreshing the display (unit:
100ms) (for SX) ╳ ○ ╳ ╳ 5 - - R/W NO 5 D1198* SA/SX: When X3 interruption (I301) occurs, immediately extracting the low 16 byte from X1 high-speed counting value. (Only supports V1.8 and above versions.) SC: When X5 interruption (I501) occurs, extracting the low 16 byte from high-speed counting value. (Only supports V1.8 and above versions.) EH3/SV2: Enabling X3 to get the counting value of the high-speed counter C241 (M1058 is On) (Low word) ╳ ○ ╳ ○ 0 0 - R NO 0