DVP02TK-S/DVP02TU-S Temperature Control Module Manual Thank you for using Delta DVP02TK-S/DVP02TU-S Temperature Control Module. To ensure a successful installation and for safety reasons, please read this manual carefully before operating. This manual contains important safety instructions. Cette notice contient des instructions importantes concernant la sйcuritй. _1 Couper toutes les sources d’alimentation avant de faire l’entretien et les rйparations. Disconnect all sources of supply before servicing. For use in a controlled environment. Refer to manual for environmental conditions. Pour utilisation en atmosphиre contrфlйe. Consulter la notice technique. Warning:
proper ventilation is required to reduce the risk of hazardous or explosive gas buildup during indoor charging. Avertissement : une ventilation adйquate est nйcessaire afin de rйduire les risques d’accumulation de gaz dangereux ou explosifs durant la recharge а l’intйrieur. The analog input circuits shall not be connected to MAINS CIRCUIT for measuring or sensing and limited to SELV circuit only. The supply voltage and transistor (analog) outputs are SELV circuit and limited energy. This is an OPEN TYPE module and therefore should be installed in an enclosure free of airborne dust, humidity, electric shock and vibration.
The enclosure should prevent non-maintenance staff from operating the device (e.g. key or specific tools are required for operating the enclosure) in case danger and damage on the device may occur. Do not touch any terminal when the power is on. This manual provides you with the introductions on the specifications, installation, basic operations, setups and temperature measurements. Read this manual carefully and follow the instructions to avoid danger and damage to people and property. DVP02TK-S series includes DVP02TKR-S, DVP02TKN-S and DVP02TKL-S. DVP02TU-S series includes DVP02TUR-S, DVP02TUN-S and DVP02TUL-S. 1-2