CANopen Communication Module DVPCOPM-SL registers in DVP-SV from the Output Table and Input Table below. Click on “ OK ” to complete setting up the node list. l Downloading the data to the master the PLC is in RUN status at this moment, you will be given a warning saying that you have to stop the Select “ Network “ => “ Download ” to download the configuration data to DVPCOPM-SL master. If operation before the download. Click on “ OK ” to stop the PLC and start to download the data to the master. After the download is completed, you will be given another warning, asking you if you would like to run the PLC again.
Click on “ OK ” to restart the PLC program, or click on “ Cancel ” to stop the PLC. DVP-PLC Application Manual 18