DVS-108 Series Managed Industrial Ethernet Switches User Manual SSH Configuration 3.1.8.4 Telnet Configuration You can configure Telnet configuration in this page. Telnet Configuration 3-32 Description Factory Default SSH Admin Mode Specify the status of SSH. Disable: SSH is disabled. This is the default setting. Enable: SSH is enabled. Disable SSH Version 1 Specify whether SSH version 1 is supported. Disable: SSH version 1 is not supported. Enable: SSH version 1 is supported. Both version 1 and version 2 can be supported on the switch. Enable SSH Version 2 Specify whether SSH version 2 is supported. Disable: SSH version 2 is not supported. Enable: SSH version 2 is supported.
Both version 1 and version 2 can be supported on the switch. Enable SSH Session Timeout (minutes) The SSH session time-out period in minutes. When there is no activity and the time-out period is reached, the SSH session will be closed. Enter a period in the range of 1 to 160 minutes. 30 Maximum Number of SSH Sessions The maximum number of inbound SSH sessions. The number must be in the range of 0 to 5. 5 Current Number of SSH Sessions This field displays the number of simultaneous SSH sessions. 0 Description Factory Default Telnet Admin Mode Specify the status of Telnet. Disable: Telnet is disabled. Enable: Telnet is enabled.
Enable Telnet Session Timeout (minutes) The Telnet session time-out period in minutes. When there is no activity and the time-out period is reached, the Telnet session will be closed. The period must be in the range of 1 to 160 minutes. 30