６ External Specifications of E3NW-ECT Window (for NJ) This section describes the display of each screen and procedure in this project. Make sure that the devices are connected as indicated in section 4-1 before operating each screen. If the device is connected incorrectly, turn OFF the power to each device and connect them as indicated in section 4-1. ６ - １ Menu Screen After the power is turned ON, the following screen appears. (1) (2) (3) 21 No. Function Description (1) ”Monitor screen” button Moves to the screen that displays and controls information for all sensor amplifiers that are connected to the E3NW-ECT Communication Unit.
(2) “EtherCAT NODE switching” button Displays a pop-up screen for EtherCAT NODE switching. (3) ”Language switching” button Displays a pop-up screen for language switching.