７ - ３ Setting and Transferring the Project Data This section explains how to import, set, and transfer the project data. 49 1 Start the Sysmac Studio. After starting the Sysmac Studio, click the “Import” button to import a project file. 3 Select the project file to import. In this example, ”E3NW NA 9inch.smc2” file is _ _ selected. 4 Open the project of the NJ. Select ”PLC NJ3 0” from the _ _ pull-down menu of Multiview Explorer. 5 Check a node address in the EtherCAT Tab Page of the Sysmac Studio, and set the rotary switch of the E3NW-ECT to match the node address of the project. Node address is set to “100” here.