Reliability, Safety KUHNKE Automation 3.4.1 Danger This symbol warns you of dangers which may cause death or grievous bodily harm if operators fail to implement the precautions described. 3.4.2 Attention This symbol draws your attention to information you must take a look at to avoid malfunctions, possible material damage or dangerous states. 3.4.3 Note This symbol draws your attention to additional information concerning the use of the described product. This may include cross references to informa- tion found elsewhere (e.g. in other manuals). 3.4.4 Under Construction This symbol tells you that the function described was not or not fully avail- able at the time this document went to press.
3.4.5 Instruction Wherever you see these symbols in the left margin, you will find a list of steps instructing you to take the appropriate computer or hardware actions. They are intended as a means of orientation wherever working steps and background information alternate (e.g. in tutorials). 3.5 Safety Our products normally become part of larger systems or installations. The in- formation below is intended to help you integrate the product into its envi- ronment without dangers to humans or material/equipment.
To achieve a high degree of conceptual safety in planning and installing an electronic controller, it is essential to exactly follow the instructions given in the manual because wrong handling could lead to rendering measures against dangers ineffective or to creating additional dangers. 10 E 774 GB 30.06.2014