Kendrion Kuhnke Automation GmbH CAM Creator 7.4.4.1 Encoder Used to set up the incremental encoder. You may set up up to eight different encoders. Encoder examples include "Absolute EtherCAT" or "Absolute CAN" (currently not implemented). See section 8 for an example. 2 The module currently supports 24V incremental encoders only Kuhnke FIO CAM Control ( E 808 GB ) 39 11/10/2017 Term Explanation Values Type 2 24V, CAN, on-board (digital inputs) Resolution Resolution 1...8192 ticks Zero-Point Offset Zero point offset 0 .. 4096 ticks Anti-Jitter-Value Stabilisation of output 0.. 50 ticks Cycle-Time Time the controller needs to detect the speed. 10...1000 ms