Kendrion Kuhnke Automation GmbH CAM Creator Pick one of the five Mode options: The CAN/CAT Receiver mode apply to "Composite Mode", see 7.3.5.2, i.e. to running several CAM modules connected to one encoder. CAN Parameter: Sets the node ID You need to assign a node ID (CAN address) to the FIO CAM Control module before you can add it to a CANopen network. The node ID you set in this dialog will be stored in the module memory when you upload the cam program. Enter the unit's current node ID into the box above "actual". Enter another node ID into the box above "new".
Kuhnke FIO CAM Control ( E 808 GB ) 41 11/10/2017 none No mode selected ENC Transmitter Incremental encoder (AB-Ref) - EtherCAT transmitter CAN Transmitter CAN transmitter (currently not implemented) CAN Receiver CAN receiver (currently not implemented) CAT Receiver EtherCAT receiver