1.3 About the servo motor 1.3.1 Nameplate description ←Motor model ←Rated output power, input voltage of the driver, rated speed ←Rated torque rated current ←Insulation level protection grade Motor code ←Product code and serial number Note: Texts on the actual product nameplate may differ from those shown in the figure 1.3.1 Model description *1: not recommended. Varieties with key slots may have the keys removed. *2: Partial varieties can be of double-circular key slots; except for motors with flange 130, the key width and height are the same with the U-shaped key slots; for details, refer to Chapter 10. Elements of the 10 servo motor models are not subject to causal combination.
For details, refer to the selection guide or consult us. 11 Technical Manual for EA190 Series Servo Driver V100 ①represents the series ②represents the flange size of the motor ③is the rated output power of the motor SER: Standard servo motor 04: 40mm 005:50W SES: High-performance servo motor 06: 60mm 0R1: 100W 08: 80mm 0R2: 200W ④represents the rated speed of the motor 09: 86mm 0R4: 400W 10: 1000 rpm 11:110mm 0R7: 750W 15: 1500 rpm 13: 130mm 1R0: 1000W 20: 2000 rpm 25: 2500 rpm 30: 3000 rpm ⑦represents the inertia type ⑨represents optional accessory A: Low inertia Null: No optional accessory ⑤represents the voltage level B: Medium inertia 1: With holding brake (DC24V) 2: 220V C:
High inertia 2: With oil seal 3: With holding brake and oil seal ⑥represents the encoder type ⑧represents the shaft type B: 17-bit incremental optical encoder X: Optical axis, without key slot *1 F: 23-bit absolute type optical encoder Y: With U-shaped key slot and screw hole *2 ⑩represents a special specification H: 17-bit incremental magnetic encoder Z: With double-circular key slot and screw hole K: 17-bit absolute type magnetic encoder