GTC – SOFTWARE DEVELOPMENT GROUP When the download is finished a message asks you to quit the application in order to apply the changes. Fig. 15. End of Software Update Download By pressing the OK button, the real software update starts. The downloaded files are extracted from the ZIP archive and, after a backup of the existing application files, the current application files are replaced with the new ones. In addition, the software upgrade may also involve changes in the configuration parameters and/or in the structure of the local database. While the system applies the software upgrade you can see a dialog that shows you some information.
As soon as this process finishes you should press the OK button in the SidekickPC Software Upgrade dialog: Fig. 16. End of Software Update Application After you press the OK button, SidekickPC restarts automatically. If any errors occur during the software upgrade process, the system rolls-back all changes. 1.4.5. Database Update The update of the local database starts when you press the Start update button and either there is no software update available, or after that you have decided to skip an update that is not mandatory. Depending on your update options and internet connection speed, the update process may require a long time to complete.
During the update, a progress bar and some feedback messages indicate the state of the update process. The update occurs within a local database transaction. This means that if you press Cancel update or any error occurs during the update, all changes to the local data will be © 2012 Electrolux Italia S.p.A., All rights reserved 22 File: SidekickPC Manual (EN).pdf - Date: 20/04/2012