FUNCTIONAL CHARACTERISTICS OF CONTROLS USER INTERFACE N.B. Keys SW1 - SW2 - SW3 - SW4 - SW5 are enabled only when the door is open . SW0 ) "ON / OFF" KEY - Press this key to switch the appliance on and off. - LED La lights to show that the appliance is switched on. "PROGRAMME" keys SW 1 ) SOAK SW 2 ) VIGOROUS WASH SW 3 ) UNIVERSAL WASH SW 4 ) ECO / BIO SW 5 ) BREVE - Each key selects a different washing programme. - Press one of the keys to select the desired cycle. - When a key is pressed, the corresponding LED lights.
" PROGRAMM E " LEDs L1 - L2 - L3 - L4 - L5 ) - As well as lighting normally to indicate whether the appliance is "ON" or "OFF", the various LEDs may also FLASH at different speeds depending on the type of situation and the operating conditions of the appliance: - FLASHING_ F N = Normal frequency (500 ms ON, 500 ms OFF).
- FLASHING_ F V = Rapid frequency (125 ms ON, 125 ms OFF) - OFF function not operational - LIT function selected (during execution of the washing cycle) - FLASHING_ F N function selected (during cycle selection phase) - FLASHING_ F V non-operational condition (alarm condition, selection of regeneration level etc.) L s ) " SALT" LED - ON lights to indicate that the regeneration salt requires topping up. = L f ) " END OF CYCLE" LED - FLASHING_ F N lights to indicate that the washing cycle has ended.
========================== ========================== ========================== ============================================================= =================================== =================================== =================================== 8