3.2.5 Pushbuttons – LEDs and LCD The functions of each button are defined by the configuration of the appliance. Button no. 1 : this button is related to LEDs (L1чL5) and pressing it sequentially the spin speed varies from max., to no spin or rinse hold. Button no. 2 : this button is configurable: in WM versions is related to LED (L10), while in WD versions is related to LEDs L6-L8-L10. Button no. 3 : this button is configurable and is related to LED (L11). Button no. 4 : this button is configurable and is related to LED (L14). Button no. 5 : this button is configurable and is related to LED (L15). Button no. 6 :
this button is configurable and has the function of START/PAUSE and is related to LEDs 20-21. Two LEDs, one yellow that flashes in case of alarm and one red: > that flashes when the appliance is in pause, in selection, or in combination with the yellow one to indicate the alarm code. > remains lit during the cycle execution. SOI/DT 2007-11 dmm 10/69 599 70 39-88 WM WD