Button no. 7 : this button is configurable, has the function of DELAYED START. During the cycle selection phase, it is possible to select a delayed start from 30’ to 20 hours (30’ " 60’ " 90’ " 2h " 3h… " 20h " 0h) and the time displayed in the LCD, during the last hour, the time decreases minute by minute. LED wash phase indicators : The LEDs L16, L17, L18 are configurable and are used as indicators of the wash phases. LCD The following information appear on the LCD: Є The duration of the washing programme , which appears after having selected it. This time corresponds to that necessary for the maximum wash load for each programme type.
After starting the programme the time decreases minute by minute. Є The end of the programme is indicated by three zero flashing (when it is possible to open the door). Є The stop of the appliance with water in tub , after the programmes with RINSE HOLD option, is displayed by one zero flashing. The LED that indicates the door remains lit and the LED of the START/PAUSE button switches off. Є The anti-crease phase at the end of the drying cycle is displayed by one zero flashing.
SOI/DT 2007-11 dmm 11/69 599 70 39-88 Indications Pre-wash Lights during selection mode if the programme includes the pre-wash phase, and during the execution of the pre-wash Wash Lights during selection mode if the programme includes the wash phase, and during the execution of the wash Pre-wash/Wash Lights during selection mode if the programme includes the pre-wash or wash phases, and during the execution of these phases Rinses Lights during selection mode if the programme includes rinse phases, and during the execution of the rinses Spin Lights during selection mode if the programme includes the spin phase, and during the execution of the spin Rinses / Spin Lights during selection mode if the programme includes rinses and spin and during the execution of these phases Drain Lights during selection mode if the programme includes the drain phase, and during the execution of the drain Extra rinse Lights when this option has been memorized (if included in the cycle) Rinse-hold Lights if the programme includes the rinse-hold option and at the end of the cycle, when the appliance stops with water in the tub Current cycle Lights during selection mode Lights during execution of the cycle and switches off during the drain phase if selected End of cycle Lights when the programme has been completed Door locked Lights when the door lock prevents opening of the door, and switches off when the door can be opened.
Flashes when the interlock is about to release the door (may be seen if PTC devices are used, as these require one or two minutes before releasing the lock) Child lock Lights when the child safety is on and all buttons are deactivated Drying Lights during selection mode if the programme includes the drain phase and during the execution of this phase