User Manual EM303B General Purpose Inverter 8.10.2 Filtering Analog Signal Filter the analog signal to clearsignal interference.If the filtering time is too long, the response speed of analog signal will be lowered. F8-03~F8-07 set filter times of 5 analog signals. Users do not need to adjust these parameters on general conditions.
8.10.3 Options of Analog Setting Signal Bias Curve 134 Setting Frequency （Hz） Maximum Frequency 100.00% 75.00% 50.00% 25.00% VS/VF 0V 2.5V 5V 7.5V 10V 0.00% 25.00% 50.00% 75.00% 100.00% Setting Frequency Hz Maximum Frequency 100.00% 75.00% 50.00% 25.00% VS/VF 2V 4V 6V 8V 10V 0 50% 100.00% Figure 7-25 Analog Voltage Input 0～10V Figure 7-26 Analog Voltage Input 2～10V Setting Frequency（Hz） Maximum Frequency 100.00% 75.00% 50.00% 25.00% IS/IF 4mA 8mA 12mA 16mA 20mA 0 50.00% 100.00% Setting Frequency Hz） Maximum Frequency 100.00% 75.00% 50.00% 25.00% IS/IF 0mA 5mA 10mA 15mA 20mA 0 25.00% 50.00% 75.00% 100.00% Figure 7-27Analog Current Input 4～20mA Figure 7-28 Analog Current Input 0～20mA No.
Function Range Unit Default Type F8-03 VP Filter Time 0.00～60.00 S 0 .10 ● F8-04 VS Filter Time 0.00～60.00 S 0 .10 ● F8-05 IS Filter Time 0.00～60.00 S 0 .10 ● F8-06 VF Filter Time 0.00～60.00 S 0 .10 ● F8-07 IF Filter Time 0.00～60.00 S 0 .10 ● No. Function Range Unit Default Type Voltage/Current Bias Options Ones place: VS voltage bias options 0: Input / output bias 0 1: Input / output bias 1 2: Input / output bias 2 2210 〇 F8-01