User Manual EM303B General Purpose Inverter 7.1.5 F9 Group: Speed Setting Options 71 F8-27 Output Bias 2 3 _ 0.00～100.00,100.00=Fmax % 100.00 ● 283 F8-28 Input Bias 2 0 _ 0.00~ Input Bias 2 1 _ % 0.50 ● 284 F8-29 Input Bias 2 1 _ Input Bias 2 0~ Input Bias 2 2 _ _ % 25.00 ● 285 F8-30 Input Bias 2 2 _ Input Bias 2 1~ Input Bias 2 3 _ _ % 75.00 ● 286 F8-31 Input Bias 2 3 _ Input Bias 2 2~100.00 _ % 100.00 ● 287 No. Function Range Unit Default Type S/N F9-00 Not Used 288 Parameter Editing Mode 0:Editable through keypad and RS485 1:Editable through keypad 0 〇 289 F9-01 Numeric Input Control Mode Ones place: Numeric reference input control mode 0:
Auto-save the change in RAM (Press DATA/ENTER to save) 1: Auto-save the change in EEPROM (Memory function at power failure) Tens place: Not used Hundreds place: Not used Thousands place: Terminal UP/DOWN rate control 0: Automatic rate control 1: Correspond to the setting UP/DOWN rate Ten thousands place: Not Used 1000 〇 290 F9-02 Speed Setting Mode Ones place: Integrated speed input mode 0: Primary speed setting mode 1: Auxiliary speed setting mode 2:Primary speed setting mode + auxiliary speed setting mode Tens place: Speed setting mode under jog control 0: Jog numeric speed setting mode 1: Jog numeric speed setting mode + primary speed setting mode 2:
Jog numeric speed setting mode + auxiliary speed setting mode Hundreds place: Relation between auxiliary speed and primary speed 0: Primary speed + auxiliary speed 1: Primary speed - auxiliary speed 000 〇 291 F9-03 Special Speed Setting Mode 0: Program Operation 1: Wobbulation Mode 2: Stepping Mode 0 3: Stepping Mode 1 0 〇 292 F9-04