EM500 Open-Loop Vector Control Inverter User Manual 129 mode F15.46 The Switching Time 0~1000 ms 100 〇 F15.47 Phase card startup latency 0~1000 ms 100 〇 F15.48 Direction of the phase Angle 0: Advanced 1: Lag 0 〇 F15.49 Phase Angle Difference 0~180 ° 0 ● F15.50 The current phase Angle error -180~180 ° 0 ● F15.51 The phase adjusting gain 0.00-600.00 1.00 × F15.52 Phase-locked loop proportional gain 0.00~600.00 0.00 ● F15.53 Phase-locked loop integral gain 0.00~600.00 0.00 ● F15.54 Phase-locked loop filtering time 0.00~100.00 ms 0.50 ● F16 Customized Function Group F16.00 Industry Application 0: General models 1: Application of Water supply 2: Application of Air compressor 3:
Application of Winding rolling 0 〇 F16.01 Set Length 1~65535(F16.13=0) 0.1~6553.5(F16.13=1) 0.01~655.35(F16.13=2) 0.001~65.535(F16.13=3) m 1000 ● F16.02 Pulse Count Per Meter 0.1 - 6553.5 100.0 ● F16.03 Set Count Value F16.04 - 65535 1000 ● F16.04 Designated Count Value 1 - F16.03 1000 ● F16.05 Set Timed Running time 0.0 - 6500.0， 0.0: Disabled min 0.0 ● F16.06 Agent Password 0 - 65535 0 〇 F16.07 Set Accumulated Power-On Time Reach 0 - 65535, 0: Power-on Reach Time Protection Disabled H 0 〇 F16.08 Set Accumulated 0 - 65535, 0: Running time Reach H 0 〇