EM500 Open-Loop Vector Control Inverter User Manual The parameters above are mainly used to adjust the gain of various setting sources (refer to Figure 7-3). Both main frequency source A and auxiliary frequency source B have the setting gain; there is the synthetic gain by combination with the selected function code F00.06. The final setting is limited by analog adjustment input, upper limit frequency and lower limit frequency.
Main frequency source gain F00.10 主频率源增益 F00.10 Synthesis (including F00.06) Synthetic gain of main and auxiliary frequency source F00.12 主辅助频率源合 Analog quantity adjustment of synthetic frequency F00.13 合成频率的模拟 Auxiliary frequency source gain F00.11 辅助频率源增益 F00.11 成增益F00.12 量调节F00.13 Figure 7-3 Frequency Source Setting Control (Gain Description) The action mode of function codes about gain (F00.10 - F00.12) is “multiply”, i.e., “Setting=Former setting * gain”. The following will describe the analog input adjustment of synthetic frequency (F00.13). F00.13=0:
Synthetic Frequency of Main and Auxiliary Channels Synthetic frequency is directly set by the synthetic frequency of main and auxiliary channels. F00.13=1: AI1* Synthetic Frequency of Main and Auxiliary Channels F00.13=2: AI2* Synthetic Frequency of Main and Auxiliary Channels F00.13=3: AI3 * Synthetic Frequency of Main and Auxiliary Channels F00.13=4: AI4 (Expansion Card) * Synthetic Frequency of Main and Auxiliary Channels Frequency of Main and Auxiliary Channels”. The synthetic frequency is determined through “AI (percentage) * Synthetic F00.13=5:
High-Frequency Pulse (X7) * Synthetic Frequency of Main and Auxiliary Channels The synthetic frequency is determined through “HDI (percentage) * Synthetic Frequency of Main and Auxiliary Channels”. Please refer to the description of F00.04 for detailed explanations of AI1-AI4 and 164 Frequency of Main and Auxiliary Channels M A F a主in 频freq率uen源cyA s给our定ce Setting (including 00.04F)00.04等 A辅uxi助liar频y fr率equ源encBy给 sou定rce B settinFg 0(i0n.cl0ud5in等g F00.05) Limit