EM500 Open-Loop Vector Control Inverter User Manual 6.2 Function Parameter Table 75 Represents some options or present meaning of present function code. Decimal Digit Each binary digit represents some options or present meaning of present function codes Binary digit Metric unit of function codes. Their units and abbreviations are as follows: Hz Hertz kW Kilowatt us Microsecon d kHz Kilohertz kWh Kilowatt-h our★ ms Millisecon d % Percentage ★ M h Megawatt hour s Second Unit V Volt mΩ Milliohm min Minute A Ampere mH Millihenry h Hour rpm Revolution s per minute ℃ Degree Celsius m Meter ★ %: Its benchmarks are different depending upon different physical quantity; kWh: kilowatt-hour.
Factory defaults of function codes or reset to the defaults (F12.14=1). In figures (for For various power segments, present values of the function codes are the default values. example 50.00) Default For different power segments, the function codes have different defaults. Model For different power segments or batches, the function codes have different defaults. XXX Property change of function codes (whether change is permitted and conditions for change) Can be changed while inverter is running; present function code can be changed regardless of the status of inverter. ● Type Cannot be changed while inverter is running; present function code can be changed except the running status.
〇 Read only: the property of present function code can not be changed under any status. × No. Function Range Unit Default Type F00 Basic Function Parameter Group