EM630/TC6A Closed-Loop Vector Hoist Inverter User Manual Figure 2–4 Keypad Installation 2.6 Flush Mounting EM630 inverter (4.0 kW – 200 kW) can be changed to flush mounting type. Installation of EM630 inverter (22 kW or above): remove the top and bottom mounting holes of the original housing (Figure 2–5) to the position shown in Figure 2–6, and install the removed bolts back to the said mounting holes again. Remove the Installation Bolts at the Front Face and Both Sides Figure 2–5 Disassemble the Top and Bottom Mounting Holes 23