User Guide of EM730 Series Inverter Chapter 9 Function Code Table 9.1 Description of Function Code Table The function codes of the EM730 series inverter (hereinafter referred to as the “function codes”) are divided into 21 groups, and each group contains several function codes. Among them, the F18 group is a monitoring parameter group used to view the inverter status; the F19 group is a protection record group used to view the details of the last three protections; and other groups are parameter setting groups to meet different functional requirements. ★ Some parameters of the current series are reserved, and their readings are 0.
Some options of parameters are reserved and settable, but this may result in abnormal operation of the inverter. Please avoid misuse of such parameters.
60 F00 Basic function parameter group P61 F01 Parameter group of motor 1 P64 F02 Input terminal function group P65 F03 Output terminal function group P69 F04 Start/stop control parameter group P71 F05 V/F control parameter group P73 F06 Vector control parameter group P75 F07 Protection function setting group P80 F08 Multi-segment speed and simple PLC P83 F09 PID function group P88 F10 Communication function group P90 F11 User-selected parameter group P92 F12 Keyboard and display function group P92 F13 Torque control parameter group P95 F14 Parameter group of motor 2 P96 F15 Auxiliary function group P96 F16 Customization function group P100 F17 Virtual I/O function group P101 F18 Monitoring parameter group P101 F19 Protection record group P103 F27 Winding/unwinding application macro parameter group P105