User Manual of EM730/EM730E Series Inverter running status. If the green LED indicator above the RUN key is ON, it indicates that the inverter is in the running status. If this indicator is flickering, it means that the inverter is in the status of deceleration to stop. Regardless of the speed or torque reference input control, the inverter will run in the input control mode at the jog speed once jogging is enabled. F00.02=1: terminal control (LOC/REM indicator OFF) The start and stop of the inverter are controlled by the start and stop control terminals that are defined by the function codes F02.00 to F02.06. Detailed settings of terminal control are dependent on F00.03. F00.02=2:
Communication control (LOC/REM indicator flickering) The inverter start and stop are controlled by the host through the RS485 communication port. See the 11.3.4Register address distribution 7000H control description for details. The final command source also depends on the input functions “24: switching from the Run command to keyboard” and “25: switching from the Run command to communication”. If the input function “24: switching from the Run command to keyboard” is valid, the current command source is “keyboard control”. If the input function “25: switching from the Run command to communication” is valid, the current command source is “communication control”.
Otherwise, the command source depends on the setting of the function code F00.02. Terminal RUN: Xi terminal is set to “1: terminal RUN” Terminal F/R: Xi terminal is set to “2: running direction F/R” Terminal control can be divided into two types: two-line control and three-line control. Two-line control: F00.03=0: the terminal RUN is in the running status, and F/R in the forward/reverse status. 130 Function Function code Default Parameter description Unit Attribute code name setting F00.03 Options of terminal control mode 0: terminal RUN (running) and F/R (forward/reverse) 1: terminal RUN (forward) and F/R (reverse) 2: terminal RUN (forward), Xi (stop) and F/R (reverse) 3:
terminal RUN (running), Xi (stop) and F/R (forward/reverse) 0 〇