DS-40 User’s Guide Troubleshooting Scanned Colors Differ From the Original Colors Scanner components may need to be adjusted. Perform calibration. & “Scanner Adjustment using the Calibration Sheet” on page 40 The scanning area is unsatisfactory The edges of your original are not scanned If the edges of your original are not scanned correctly, set the Size to Auto Detect , click the Configuration button, and then adjust the cropping area in Crop Margins for Size “Auto” . Problems Remain After Trying All Solutions If you have tried all the solutions and have not solved the problem, initialize the Epson Scan settings. Click Configuration , select the Other tab, and then click Reset All . 50